JoCo USB Help

Home › Forums › Everything Else › JoCo USB Help

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #17615
    rhombusjr
    Participant

    I got one of those nifty USBs at one of JoCo's shows, but my computer for some reason is incapable of safely ejecting any usb drive and now my computer cannot read the usb (I'm not quite sure why I felt compelled to eject the usb before I copied everything to my computer, but I did). Every time I eject and remove a usb device from my computer it says I've improperly removed the device, but I've never had any problems before. So my question is, is there someone I can send my usb to get it replaced or something? I recall seeing some warranty information on the usb, so if someone could give me that, it would be very much appreciated.

    #67206
    robgonzo
    Participant

    Just send an email to JoCo about it. I’m sure there is something he or Scarface can do.

    #67220
    paulrpotts
    Participant

    There is a text file that comes on the drive that says:

    For any warranty related issues, please contact:

    Greg Sachs
    Director of Sales
    PrintUSB.com
    1230 Rosecrans Ave., Ste. 408
    Manhattan Beach, CA 90266

    310.356.7911 tel | 310.356.7920 fax | greg@printusb.com
    http://www.printusb.com/

    My guess is that they would be happy to replace defective _hardware_. I'm not sure they are up for replacing a drive that got its file system trashed, but it wouldn't hurt to ask.

    If they won't do it I'm sure either Scarface or someone on the forums (including me) would be happy to "refill" your drive with fresh data.

    But before doing that, have you tried running (I'm assuming you're on Windows) CHKDSK? (Start, "Run…," type in cmd.exe, get a DOS window, type E: or whatever drive letter your USB drive is mounted as, type CHKDSK, see what happens).

    If your computer "is incapable of safely ejecting any usb drive" _in general_, that sounds like a Windows driver/registry/virus problem. I suppose it is also possible your PC might have a hardware issue, but USB has such a simple hardware protocol that if the drive can be read to begin with, I think it is more likely to be a software problem. It sounds to me like you need to fix your computer problem first or the same problem will happen again.

    #67221
    Jmonkee
    Participant

    I’d start by just trying your drive on a different computer. That will tell you if it’s really defective or not.

    #67224
    Spiff
    Participant

    I agree with that. Maybe even trying it out on a Mac to see if it has the same issues.

    #67228
    JoAnn in VA
    Participant

    Lol, be careful of Spiff…I seem to remember someone telling me the best way to fix my PC was to drop it in a river and go buy a Mac…

    #67230
    Spiff
    Participant

    That couldn’t have been me. I would never advocate polluting a a perfectly good river with a PC like that. 😉

    #67256
    rhombusjr
    Participant

    Thanks for the replies. This may sound crazy, but I'm running MacOS 10.4 on my computer. What happens with my usbs is that I'll right click on the icon on the desktop, click "Eject", and the icon will disappear from the desktop. I'll wait a little bit, and I'll disconnect the hardware and I'll get a warning message telling me I've improperly removed the hardware. I tested my usb on another computer and it couldn't read it either. I also looked at the usb on my computer using disk utility and it said the disk was not formatted. I'll start by contacting PrintUSB. Thanks again.

    #67285
    paulrpotts
    Participant

    Huh, that is pretty strange. Having used and owned and developed on many, many PCs and Macs over the last 20-something years, going back to DOS and MacOS 1.1, It’s the kind of behavior I’d expect out of a PC, not a Mac. But weird stuff happens.

    When you get the USB stick straightened out, you might have your nearest Apple store take a look. Are you are running some kind of unusual utility or extension that does something with mounted file systems?

Viewing 9 posts - 1 through 9 (of 9 total)
  • The topic ‘JoCo USB Help’ is closed to new replies.