Reply To: Pizza Day tab – unfinished?
Home › Forums › JoCo Tabs › Pizza Day tab – unfinished? › Reply To: Pizza Day tab – unfinished?
I’m here to tell you that yes, in fact, you can hurt yourself with guitar strings, particularly when you are first bringing them up to initial pitch, usually on a steel-string acoustic. When they break, they can indeed cut you. I have had my face and arm cut. They can also develop a sharp fractured end that damages the fretboard or top of the guitar. I had a string curl under and embed itself in my fretboard once, creating a nasty divot in the wood. So, when I’m bringing the string up to pitch for the first time, I have the guitar facing away from me.
That said, this is kind of rare. Strings usually break at the bridge or the nut or right at the tuning machine. If this happens more than once in a blue moon, it probably means you need to see a luthier: you’ve got a rough edge in the nut or on the bridge that shouldn’t be there.
The best way to avoid surprise string breakage is to replace them once in a while. Also, wipe them down after every set. Skin oil will eat the strings and they’ll break prematurely.
Even if you never play, strings that have been on there for a year will be oxidized and dull-sounding. If I’m playing regularly, I put new strings on about monthly. If I were touring or recording and playing for hours every day, I’d probably change strings weekly. (But not right before a show — the strings do some initial stretching and will tend to go flat until you’ve got them slightly broken in).
Also, it’s bad news to set up an alternate tuning that requires you to take strings past their usual pitch. It would be better to use a capo or partial capo. It’s hard on your guitar as well. And don’t change them all at once; replace them one at a time to avoid dramatic changes in tension on the neck and bridge.
If the strings won’t stay in tune, it could be because the way you’re winding them on the tuning post is not secure, and they are slipping. A lot of people put _way_ too many winds on. Ideally you want a sharp kink, and then an over-under “lock,” and no more than two or three turns around the post, so there is nothing to slip.
The first of those demos that I looked at shows the guy removing all the strings from his acoustic at once — that’s NOT a good idea. Also, he’s using too many windings, and not doing the over/under “lock.”